QUALIFICATION
EDUCATION: DIPLOMA IN INSTRUMENTATION OR MECHANICAL
CERTIFICATION: ANY ADDITIONAL CERTIFICATION IS AN ADDED ADVANTAGE
EXPERIENCE: 5-7 YEARS AND FULLY FAMILIAR WITH THE ISO PROCEDURES WITH GULF EXPERIENCE AND GCC DRIVING LICENSE
LANGUAGE : MUST SPEAK ENGLISH
ORGANISATION STRUCTURE
REPORTS TO: LABORATORY MANAGER
SCOPE OF WORK :
TO RUN THE CALIBRATION DEPARTMENT. FULLY FAMILIAR WITH THE CALIBRATION OF ELECTRIC AND ELECTRONIC EQUIPMENTS SUCH AS PRESSURE, ENVIRONMENTAL, THERMAL, MECHANICAL, VALIDATION, MAPPING ETC.
PRIMARY RESPONSIBILITIES
1. TO INDEPENDENTLY RUN THE CALIBRATION DEPARTMENT IN ACCORDANCE WITH THE REQUIREMENT OF ISO PROCEDURE.
2. CERTIFICATION OF THE EQUIPMENTS AND AUTHORIZED SIGNATORY.
3. PREPARATION OF DOCUMENTATION/UPDATING FOR ISO REQUIREMENTS AS AND WHEN REQUIRED. MANAGING THE EMPLOYEES WITH PROPER DIRECTION.
4. GENERATION OF BUSINESS FROM THE MARKET ACCORDING TO THE BUSINESS TARGETS.
5. RECORD ALL THE DETAILS OF THE EQUIPMENTS AND CUSTOMERS.
6. CHECKING THE CONDITION OF THE EQUIPMENTS AND RECORDING THE SAME WHEN RECEIVE.
7. HANDLING THE EQUIPMENTS WITH CARE.
8. READING/UNDERSTANDING TECHNICAL/SUPPORT DOCUMENTS OF EQUIPMENT BEFORE START THE JOB.
9. FOLLOW THE CALIBRATION/TEST AS PER THE PROCEDURE AND INSTRUCTIONS FROM THE SUPERIOR.
10. REPORTING TO SUPERIOR ABOUT THE FAILURES/MALFUNCTIONS OF THE EQUIPMENTS.
11. MAKING PROPER REPORTS OF CALIBRATION/TEST AND CERTIFICATES.
12. CHECKING ALL EQUIPMENTS AND DOCUMENTS DURING DELIVERY TO THE CUSTOMER.
13. FOLLOWING ALL THE QUALITY PROCEDURE/SYSTEM FOR LABORATORY’S DOCUMENTATION, RECORDING AND INFORMATION.
14. KEEPING ALL THE LABORATORY ASSETS AND MASTER EQUIPMENTS PROPER LOCATION, CLEAN AND NEATLY.
15. CHECKING PERFORMANCE OF MASTER EQUIPMENTS REGULARLY.
16. CHECKING CALIBRATION/MAINTENANCE RECORD OF MASTER EQUIPMENT REGULARLY.
17. KEEPING THE LABORATORY PREMISES AS PER THE QUALITY SYSTEM AND MAINTAINING CLEANLINESS AND GOOD HOUSEKEEPING.
18. REPORTING AT CUSTOMER’S SITE ON TIME WITH ALL THE REQUIRED EQUIPMENTS AND DOCUMENTS.
19. FOLLOW THE SAFETY RULES AND USE THE REQUIRED PERSONNEL PROTECTIVE EQUIPMENTS.
20. OBSERVING THE CONDITION OF EQUIPMENT AND REPORT TO THE CONCERNED PERSONNEL.
21. CHOOSING APPROPRIATE LOCATION TO PERFORM THE CALIBRATION/TEST.
22. REPORTING UNSAFE CONDITIONS OF EQUIPMENT/CALIBRATION JOB.
23. PROPERLY HANDING OVER THE EQUIPMENTS TO THE CONCERNED PERSONNEL AFTER THE CALIBRATION/TEST.
24. RECORDING AND REPORTING TO LABORATORY ABOUT ALL THE ACTIVITIES RELATED TO CALIBRATION/TEST JOB.
Email : pers129@alkhalidiagroup.com
.png)
